Changzhou Sunlight Solar Energy Co., Ltd.

Separated Solar Water Heater System

Separated Solar Water Heater System
Product Detailed

Solsr system run under pressure;
High quality and competitive price;
CE,EN12975;
Solar Keymark;
ISO,SRCC certification;

solar water heater system  :

The solar water heating system is consisted of solar collector, heat preservation water tank, solar power workstation and the pipe. The solar collector is consisted of super conducting vacuum heat collecting tube and header, so it's of great efficiency of heat collecting. The absorbing percentage of the glass vacuum collector is more than 94%. In the sunny days of spring or autumn, each collecting tube could make the water up to 90 only in 2.5 hours. The water tank uses enamel as internal bladder and polyurethane integral foaming as heat preservation material to improve the heat preservation ability. And it makes the system be used as usual under minus 50 . The high corrosion-resistant and good heat preservation PPR pipe is used as the system's pipe, so it adds the good efficiency and long service of the system.

 

The characteristics:

1 The collector and the water tank are separated, and the system runs under the forced pressure;

2 The controlling device is specialized, so the system runs automatically.

3 The water tank can be installed anywhere.

4 The heat pipe vacuum tube collector is two circuit system, free of freezing and could be used all year.

5 The metal super conducting vacuum heat collector is used, no water in the tube, no bursting and could be used as usual under minus50.

6 The water tank applies the enamel internal bladder, run under pressure.

7 Provide the water at the same temperature, set the highest temperature, heat the water at set point by electricity, protect the data when power off, supply the hot water 24 hours a day.

8 The system is designed separately, in harmony with the structure.

9 The heat collector could be mounted on the balcony, the southern wall, sloping roof or awning.

10 The system is designed as unit, convenient to transport.

Specification:

 100L,150L,200L,250L,300L,500L.

Inner tank:enamel porcelain or SUS304/2B,it depends on your requirement.

Outer tank:galvanized steel or colorful steel sheet.

Accessories:pump station,controller,vent valve,copper  connections.



Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.